The LS-LV Ford Focus was a huge change from the previous LR model. With new engine combinations, from the reliable Duratec 2.0L, torguey turbo diesel to the Volvo-sourced 2.5L 5 cylinder turbo found in local XR5 models (ST models overseas).
Mechanically, the LS-LV Focus has a lot in common with 2004-2013 Volvo C30, S40 and V50 models as well as the Mazda3.

If you're looking to improve upon an already pretty good package, we can help.

If you're looking replacement parts or performance parts that you can't see here, please contact us and we can help.

Auxiliary Drive belt kit. LS-LV Focus XR5

Auxiliary drive belts (pair) for LS-LV Focus XR5.

AC to crank & Alternator to AC.

Part number
Aux belt kit. LS-LV XR5 $85.00

Gates Kevlar Timing Belt. Focus XR5

Gates Racing Kevlar timing belt for LS-LV Focus XR5. 5 cylinder models only!

Ideal for high performance applications. Longer service life than a typical oem style reinforced rubber belt.

Part number
Gates Kevlar t/belt kit. LS-LV XR5 contact us

click on the images to enlarge

ZunSport stainless steel mesh grilles for LS-LV Focus XR5

Zunsport grilles offer additional protection from road debris as well as an improved, more aggressive look for LS-LV Focus XR5 models.

We can also offer upper grilles without the cutout for the Ford badge for those not using the factory Ford locking mechanism.

Part number
LV XR5 Upper & single-piece Lower. Black. ZFR35208B $415.00
LV XR5 Upper & multi-piece Lower. Black. ZFR30808B $379.00
LS/LT XR5 Single-piece Lower only. Black. ZFR35805B $295.00

Click on the images to enlarge.

Rear 302mm brake conversion

Intended to compliment front brake upgrades and made up of oem parts, this brake conversion fits LZ Focus RS rotor on the the rear of Ford Focus LS-LV XR5 models and Volvo C30/S40/V50/C70 models on the shared P1 platform.

The larger 302mm rotor replaces the original 280mm rotor and provides increased braking effectiveness, a descrease in stopping distances, and improvement in repeated hard braking.

We offer this upgrade in the form of several 'kits'.
Our base kit includes required caliper hangers (pair) and Genuine Ford LZ Focus RS rotors (pair).

Click here for full details associated components and other available kits.

Part number
LS-LV/P1 302mm conversion base kit DVSP1KIT1 $589.00

HEL Performance Brake Lines

HEL Brake line kits eliminate that 'spongy' feeling often found with rubber hoses under extreme braking conditions - the time when performance is needed the most.

HEL Brake lines are expertly manufactured using stainless steel fittings, crimped directly to high performance Teflon PTFE stainless steel braided hose with an outer protective sheath.

The outer sheath is available in many different colours.
See HEL Brake line colour options. Please advise your colour preference when ordering.
Hoses are compatible for use in all brake and clutch systems, meaning you can also use all types of brake fluid.

Part number
LS-LV XR5 Full set. FOR-4-480 $178.90
LS-LV XR5 Front lines only. FOR-4-480-F $90.00
LS-LV XR5 Rear lines only. FOR-4-480-R $90.00

Brembo brake rotors

If you're looking for an upgrade to a slotted rotor or just a great quality replacement for original rotors, there is a Brembo offering to suit your requirements.

They are available in slotted and non slotted variants.
Pricing varies according to rotor choice.

Please contact us to discuss your requirements and pricing.

Stoptech brake rotors

Stoptech offer high performance slotted brake rotors for the LS-LV Ford Focus XR5

Quality is fantastic and they're well suited to more aggressive brake pad compounts.

Please contact us to discuss your requirements and pricing.

Brembo brake pads

Brembo offer oem replacement brake pads that are a fantastic, cost effective, replacement for the original pad for the LS-LV Ford Focus.

Compared to original pads, Brembo pads are also relatively low-dust.

Part number
Brembo LS-LV Focus XR5 Front $107.00
Brembo LS-LV Focus Front contact us
Brembo LS-LV Focus Rear P59042S $108.00

Project Mu NS400 brake pads

Project-Mu NS400 brake pads are performance road pad, whilst offering excellent low dust and low squeal properties.
They're guaranteed to outperform oem pads, while still being kind to the rotor.

The NS400 range of pads are an ideal way to upgrade your braking performance for minimal cost.

Part number
NS400 LS-LV Focus XR5 Front F440-NS $199.90
NS400 LS-LV Focus Rear R424-NS $179.00

Project Mu HC+ brake pads

With a lower friction coefficient than the RC09 Club Racer pad, the Project Mu HC+ still offers fantastic performance and performs better from cold.

It is a very high performance brake pad and is perfectly suited is both an aggressive road pad and a real race pad.
Performance from cold right through until 800 deg C is very good and the pad offers very good initial bite, high fade restistance and good pedal feel.

Part number
HC+ LS-LV Focus XR5 Front F440-HC $319.00
HC+ LS-LV Focus Rear R424-HC $299.00

ITG air filters

ITG air filters are by motorsports teams across the globe, including V8Supercars, F1, BTCC, Japanese SuperGT and WRC.

The reticulated polyester foam construction offers superior flow over paper filters, with capability to arrest a high proportion of airborne dust.

They are fully servicable and reuasble and will last the lifetime of the vehicle.

Part number
ITG LS-LV Focus XR5 panel WB-402 $125.00
ITG LV Focus RS barrel $197.00

click on the images to enlarge

Snabb intake pipe for 5cyl engines

The Snabb intake for LS-LV Focus XR5 and Volvo C30/S40/V50 T5 models is a mandrel-bent, full 3" aluminium replacement for the standard restrictive plastic pipe.
It features silicone couplers and marine grade 316 stainless steel clamps.

While it looks great in the engine bay, it flows better than the original, due to larger pipe dia and no power-robbing resonator.

It provides an increase in throttle response as well as a tangible, dyno-measurable, increase in power and torque.

Pipe work polished aluminium, with silicone couplers are available in black or blue.

Part number
Snabb P1 intake. Polished/Blue SNABBP1PBLU $289.00
Snabb P1 intake. Polished/Black SNABBP1PBLA $319.00

H&R Springs

Made in Germany, H&R offer a range different spring sets for a variety of vehicles and offer fantastic quality with competitive pricing.

The drop in ride height varies with the specific vehicle model, whether the vehicle was fitted with factory sports suspension, etc.

Ride is noticably firmer than stock and handling is improved while still retaining good ride quality.
We can recommend a set of shock absorbers to compliment the springs.

Springs come in a high-quality powdercoated finish.

Please contact us to discuss your requirements and pricing.

Eibach Springs

Eibach offer a range different spring sets for a variety of vehicles and motorsport applications, including lowering spring kits and coilover springs.

The drop in ride height varies with the specific vehicle model, whether the vehicle was fitted with factory sports suspension, etc.

Ride is firmer than original and handling is improved while still retaining good ride quality.
We can recommend a set of shock absorbers to compliment the springs, tailored to suit your intended use case

Please contact us to discuss your requirements and current pricing.

King Springs for LS-LV Focus models

King Springs spring sets are an inexpensive handling upgrade for LS-LV Ford Focus models
Springs offer a lower ride height than standard, providing an a more aggressive stance and an increase in spring rate.

Ride is noticably firmer with a more sporty feeling and less body roll while still retaining good ride quality.

They are Australian made and come in a high-quality yellow powdercoated finish.

Part number
King springs LS-LV Focus XR5 KLSLVFXR5 $389.00
King springs LS-LV Focus TDCi KLSLVFTD $389.00
King springs LS-LV Focus other KLSLV $389.00

click on the image to enlarge

GAZ Gold Coilovers for LS-LV Ford Focus

In 2015, we began offering GAZ Gold coilovers. Designed for fast road, track day and tarmac motorsport use, The GAZ Gold coilover packages are fantastic and feature induction hardened piston rods and have a multi point adjustable control knob to adjust bump and rebound.

These units are filled with high viscosity index fluid to alleviate cavitation and have an internal gas cell to help prevent fade. Front struts are sold as complete units, including spring (and helper spring where required), adjustable strut assembly, bump stop and top hat. Adjustable front strut mounts and Billet rear mounts are available for some applications at additional cost.

Made in England.

Part number
GAZ Gold LS-LV Focus coilover kit contact us varies

Bilstein shock absorbers

We offer a range of Bilstein shock absorbers.

Regardless of your application, there is a Bilstein shock absorber to suit your needs.

We can help you select a shock absorber to compliment your springs and vehcile use.

Shock Absorbers are not stocked items. Please allow a reasonable time frame for delivery.

Please contact us to discuss your requirements and pricing.

Please email us or give us a call on 0412 709 695 (AH only), we'll email you with an invoice. Once we've received your payment, we'll order in anything that may not be in stock and have your order on its way to you as quickly as possible.

Payment details will be included on your invoice.

If you have any questions at all, please Contact us